Tutorial Blender 3D – Membuat Warnet || (10) Membuat CPU 3D Part 6

Tutorial Blender 3D – Membuat Warnet || (10) Membuat CPU 3D Part 6


ok meet me again .. we will continue the tutorial to make a 3D CPU !! on this CPU we have reached part 6, right now !! so this is the last part to make a 3D CPU model. so let’s start right away !! we enter edit mode !! well, then here we will make the bolt !! we press “Ctrl + R” to make a line !! then we set !! here yes !! ok, we draw more lines !! ok. then we draw another line above it !! That’s enough, ok. then we draw a line next to it !! do the same thing as the left !! we set !! Hmmm.. already, we entered the vertex edge !! owh sorry, i mean vertex face !! we selection … wait a minute, this seems too wide !! Hmmm…. Wait a minute, let’s draw another line here !! because it’s too wide. cancel, we make the line above it !! ok, wow wrong. well, we enter the vertex face again !! selection section here !! we selection !! we press the “E” shortcut or extrude to the outside !! well, like this wow, it’s too far out. well, just like this we select the edges, change to vertex edge first !! then we selection !! we select the edges !! we selected the edges !! if so, we press “Ctrl + B” !! do not be too!! like this enough !! wow wrong. “Ctrl + B”. ok. then we … wow, there was an error. “Ctrl + B”. ok, enough. we will choose the edges again !! “Ctrl + B”, wait a minute !! “Ctrl + B”, ok. So, it’s round like this. “Ctrl + B”. wait, it’s a bit difficult. we enter this face first, we delete the facenya, press “del” or delete on the keyboard, then select the face !! and we will choose again, face !! well, if we return to the vertex edge !! then selection, then we press the “F” shortcut or face !! like this. the top we select the vertex, we press “Del” or delete, then select edge !! well, then we select this face !! oh yes, we haven’t deleted the side, right? we delete first !! then we make a new face !! then we make a new face on it !! to select the face is rather difficult, sometimes we get the wrong selection. it will be complicated. well, like this. wow, inside. do the same thing to every object !! ok, we made again !! oh wrong. ok, the top we do too is the same !! oh this seems faster, so that’s enough. ok. briefly !! nothing is ok, we do the same again, one more yes !! a bit complicated huh .. but we will continue to try so we just be patient !! is wrong. “Del”, edge. then we enter the vertex face again !! oh wrong. vertex edge again !! we selection !! then we face !! face!! face, ok. if we have selected the edges !! vertex edges !! we will make it more rounded. although not completely round yes. there is an oval, it seems. ok. wrong again. ok, wow. ok, already. we press the “Ctrl + B” shortcut again !! then we pull out again !! ok already, we enter the vertex face again !! we selection facenya !! then we press the “S” or scale !! wrong, sorry wrong. we press the “E” shortcut or extrude then press the “S” shortuct or scale it in !! can not. before we already pressed the shortcut “E” or extrude, after that we selected one by one huh !! we press the “S” shortcut or the scale becomes smaller !! then if you have. we do the same thing to everyone !! S. ok. S. ok. ok, one more thing, S. wow, cancel !! S, minimize !! if we have selected the facade again !! oh sorry sorry. rather slow (my laptop is slow: v) ok, then we press the “E” shortcut or extrude it in !! don’t be too deep !! ok, done. that’s it, done. oh, so it’s good right. I put the bolt here, because if you put the bolt in here it won’t fit. so I put it here. ok, that’s all the tutorial this time. hopefully useful for you guys. sorry, because the tutorial is too long. please understand, because this is a tutorial. we will continue on the video later, namely coloring this CPU. directly without making any more parts like this. Thank you for watching 🙂

2 thoughts to “Tutorial Blender 3D – Membuat Warnet || (10) Membuat CPU 3D Part 6”

Leave a Reply

Your email address will not be published. Required fields are marked *