NOTE: Only certain models in this platform series support the configuration of the following components: glass side panel, dust cover, liquid cooling system, lighting control module, LED lighting bar. Before you begin: Remove the access panel. Removal Push aside the power supply cable and any other obstructing cables to access and remove the single P1 Philips-head screw. Turn the unit around so that the side panel is facing upwards. Push the side panel forward slightly and lift it off the retaining tabs at the bottom of the chassis to remove it. Replacement Align the side panel with the bottom of the chassis and position it securely on the retaining tabs of the chassis. Push the side panel forward, and from the top and back of the panel slide it firmly sideways until it closes and clicks into place. Turn the unit back around. Push aside any other obstructing cables beside the power supply to access and replace the single P1 Philips-head screw.