How to Replace the Base Enclosure | HP ENVY 15-ed0000 x360 Convertible Laptop PC series | HP

How to Replace the Base Enclosure | HP ENVY 15-ed0000 x360 Convertible Laptop PC series | HP


How to Replace the Base Enclosure Removal Remove the two rubber feet from the base enclosure, and set them aside for later replacement. CAUTION: The adhesive that secures the rubber feet to the base enclosure is very strong so be careful not to break the rubber feet when removing them. Remove the six P1 Phillips-head screws that secure the base enclosure to the top cover. Remove the one T4 Torx-head screw at the front of the base enclosure, that secures the base enclosure to the top cover. Starting at the top edge of the unit, carefully separate the base enclosure from the top cover. Remove the base enclosure. Replacement Place the base enclosure into position on the top cover. Apply pressure along the edges to reattach the base enclosure to the top cover. Replace the one T4 Torx-head screw at the front of the base enclosure to secure the base enclosure to the top cover. Replace the six P1 Phillips-head screws underneath the rubber feet, to secure the base enclosure to the top cover. Replace the two rubber feet on the base enclosure.

Leave a Reply

Your email address will not be published. Required fields are marked *