How to Assemble the Respawn 2010 Gaming L-Desk

How to Assemble the Respawn 2010 Gaming L-Desk


Welcome to the L-shaped gaming desk
model RSP-2010 assembly video by Respawn Products Start by laying out the desk
frame components inner leg support beam and center frame. Connect the components using screw A from the assembly instructions. For the second step
assemble the accessory station and cup holder unit with nuts H and bolts G. Lay out the table support beams outer legs and accessory stations. Using bolts K
connect the stations through the outer legs into the support beam. Mount the leg
supports with stabilizer holes facing outwards with four bolts of B. from the
assembly instructions. Mount the stabilizer legs to support the beams using eight bolts of letter E. Position the middle leg frame and connect to the center frame with two B bolts. Mount the two middle leg supports using C bolts for inside connections and B bolts for the outside connections. With a friend or
just someone in the room flip the table base all the way over so that you can
start attaching the top surface. Position the middle top surface onto the frame and use 10 C bolts to connect the top to the frame. On the edge trim brackets snap
the color panels into place. Place the right and left top surfaces into
position on the table frame Before securing the tops on to the frame mount
the edge trim brackets onto the tops using six screws of F from the assembly
instructions. Mount the tabletops onto the frame using C bolts and securely
tighten all bolts onto the table frame. Press right and left color accents into
the holes at the table corners. Use the shorter screw F. to attached to the front accent panel and the larger screw is in the back of the accent panel. Pay attention during this step is to not to drive the longer screw through the
tabletop surface. Assemble the monitor stand by using to B bolts to connect the support beam and to stand legs Attach the monitor stand surface with
five of the D bolts. Secure the monitor stand to the tabletop with four J bolts from underneath the surface. Now you’ve assembled your RSP-2010
L-shaped gaming station. Live to play another day.

One thought to “How to Assemble the Respawn 2010 Gaming L-Desk”

Leave a Reply

Your email address will not be published. Required fields are marked *