2004-2014 Ford Mercury Jet Performance Computer Programmer Installation How-To Tutorial 15043

2004-2014 Ford Mercury Jet Performance Computer Programmer Installation How-To Tutorial 15043


Today we’re gonna program a 2010 Mustang with
the Jet Programmer. And we’re just gonna kind of walk you through all the available options
that you have in the Jet Custom Programming. The first instruction is to turn the ignition
key to the on position and then press any key to continue, as you can see. The program’s
now identifying the vehicle it’s plugged into. Now we’ll select the programming section,
and we’re gonna go custom programming. Now we can select our engine tuning options
based on what grade of fuel that we’re using: regular, mid-grade, or premium. For this vehicle,
we’re gonna select premium fuel. This vehicle has an automatic transmission, so we’re gonna
go ahead and select yes. We’re gonna modify the shift firmness. We’re gonna raise the
RPM limiter. We’re gonna take this one up 400 RPM, although it can go up as high as
800 RPM. We’re gonna modify the speed limiter. We’re gonna take this one all the way up to
186 miles an hour. This doesn’t have a modified thermostat, but if your vehicle did, you would
answer yes to this question. No modified tire size on this vehicle, but for trucks where
you put in a larger tire, this is the option. You can select everything from, I think, 24
inches all the way up to 38 inches. This vehicle again doesn’t have a modified gear ratio,
but you can select various gear ratios depending on your application. Now we’re gonna select
no to the choices. And we’ll go into its programming. A few times during the process it’s gonna
ask you to turn the key on or off and cycle through. And press the key to continue. Now the program’s completed. It’s gonna ask
you to turn the ignition off, press any key, turn it back on, press any key again. It’s
gonna clear any codes stored in the computer. That’s it. Unplug the cable and you’re all
set to go.

Leave a Reply

Your email address will not be published. Required fields are marked *